The Finite Element Analysis: ANSYS Static Structural

Introduction

A simulation uses a model to analyze the behavior and performance of a natural or theoretical system. In a simulation, models may be used to examine current or projected system properties (Chen and Liu, 2018). The Finite Element Analysis (FEA) is the modeling of any given physical phenomenon using the numerical approach called the Finite Element Method (FEM) (Samadi et al., 2022; Shih, 2018). Engineers utilize FEA software to minimize the number of physical prototypes and trials and optimize components in their design process to build better products quicker while saving on expenditures (Singh, Ahmad, and Saini, 2019; Reddy and Nagaraju, 2019). Mathematics is required to comprehend and quantify any physical phenomenon, such as structural or fluid behavior, heat transfer, wave propagation, or the proliferation of biological cells (Loney, 2019). An example is a bridge bearing pad or the warren truss bridge, which is analyzed in this study.

Objectives

The FEA simulation is guided by the following objectives:

To solve a bridge truss as shown on the blackboard.
To perform a linear statistic structural analysis in ANSYS.

FEA Simulation Procedure and Setup details

Step 1: Modeling of truss with ANSYS Program Selected Static Structural and placed on the homepage of ANSYS workbench application.

Step 2: Drawn the truss use with Designmodeler option in Geometry and entered dimensions like was given.

Figure 2: Truss dimension entered for drawing

Step 3: Selected Concept to Cross Section and applied Circular for the model.

Step 4: Entered 0.15m for cross-section radius to all elements.

Step 5: Selected Lines from Sketches from Concept menu to create a combined truss structure.

Step 6: From Details of Line Body selected Circular1 for Cross Section.

Step 7: Generated cross-section command and completed modeling.

Step 8: Selected Edit command from Model button in workbench to enter conditions like supports, and forces.

Figure 8: Adding supports and forces icons

Step 9: Generated mesh for slicing elements.

Step 10: Selected Fixed Support from Insert from Static Structural options.

Step 11: Added Fixed Support to left starting point.

Figure 11: Adding fixed support to the left

Step 12: Selected Displacement from Insert from Static Structural

Step 13: Added Fixed Support to left starting point and entered 0 m for A, E components.

Step 14: Added Force from Insert option

Figure 14: Adding force from the insert icon

Step 15: Entered 6kN to -Y direction like shown in figure

Step 16: Added Force to analysis. The second force is 8kN to -Y direction.

Step 17: Added total deformation to solution for see deformations on the results.

Figure 17: Addition of total deformation

Step 18: Added Force Reaction to solutions for see reaction forces on the results.

Step 19: Solve command executed and program calculated results.

Results and Analysis of those Results

Results of Showed total deformation and location

Figure 20: Total deformation from ANSYS analysis

Table 1: Tabular data for reaction forces for Node A

Tabular data for reaction forces for Node A

Table 2: Tabular data reaction forces for Node E

Tabular data reaction forces for Node E

Location of the Frame Undergoing Maximum Deflection

Table 3: Node A (Fixed Support)

Node A (Fixed Support)

Table 4: Node E

Node E

Manual Calculations

The moment of a force is defined as the product of the distance from a point to the point of application of force and the element of the force that is perpendicular to the line of distance.

M = F·d

Momentum (M) measures a forces turning impact or rotational capacity. Moments of all applied forces must equal zero for a structure to be in equilibrium (Mahdavi, 2020; Praisach and Pir_an, 2022). In this blackboard example, forces F1, F2, and F3 tend to spin the truss clockwise concerning node 1, but the response force R7 on node 7 cancels this effect, maintaining the trusss equilibrium (Lindstrom, 2019; Emri and Voloshin, 2018). This equilibrium condition is theoretically defined as the total of all forces and reactions equal to zero moments.

M₁ = ©F₁· x₁ = 0 (9)

= R₁· 0 F₂ · 1.5 F₃ · 3- F₄ · 4.5 + F₅. 6+F₆^.7.5+R₇ · 9 = 0

For this example, given F₁= F₂= F₃ = 6kN, the value of reaction R7 can be found solving equation (9):

= R₁ · 0 6kN · 1.5 6kN · 3 6kN · 4.5 + 8kN · 6+8kN · 7.5+ R₇ · 9 = 0

-60 + R₇ · 9 = 0

R₇= 6kN

And the value of reaction R₁ can be found solving equation (9):

= R₁ · 9 6kN · 4.5 6kN · 3 + 6kN · 1.5 + R₇ · 9 = 0

R₁ · 9 54 = 0

R₁ = 6kN

Analysis of Forces on Nodes using FBD and the equilibrium conditions ©F_y = 0 and ©F_x = 0.

Figure 23: Free Body Diagrams (FBD) for analyzing forces at truss nodes

Node 1

Fy=0. Analysis of forces acting along the y-axis.

R1+F12sin60⁰=0

Or 6kN+0.866F12=0&&&&&&&&&&&&&&&&&&& (0)

Fy=0. Analysis of forces acting along the x-axis:

F13+F12cos60⁰=0

Or F13+0.5F12=0&&&&&&&&&&&&&&&&&&&&. (1)

Node 2

Fy=0. Analysis of forces acting along the y-axis.

-F2-F12sin60⁰-F23sin60⁰=0

OR -6Kn-0.866F12-0.866F23=0&&&&&&&&&&&&&&&&. (2)

Fy=0. Analysis of forces acting along the X-axis

F24-F12cos6⁰+F23cos60⁰=0

Or F24-0.5F12+0.5F23=0&&&&&&&&&&&&&&&&&&& (3)

Node 3

Fy=0. Analysis of forces acting along the y-axis

-F3+F34sin60⁰+F23sin60⁰=0

or -6kN+0.866F34+0.866F23=0&&&&&&&&&&&&&&&&. (4)

Fy=0. Analysis of forces acting along the x-axis

-F3-F23cos60⁰+F34cos60⁰+F35=0

Or 6kN-0.5F23+0.5F34+F35=0&&&&&&&&&&&&&&..&. (5)

Node 4

Fy=0. Analysis of forces acting along the y-axis

-F4+F34sin60⁰-F45sin60⁰=0

Or -6kN-0.866F34-0.866F45=0&&&&&&&&&&&&&&..&. (6)

Fy=0. Analysis of forces acting along the x-axis:

-F4-F34cos60⁰+F45cos60⁰=0

Or F24-0.5F34+0.5F45=0&&&&&&&&&&&&&..&&&&. (7)

Node 5

Fy=0. Analysis of forces acting along the y-axis

-F5+F56sin60⁰+F45sin60⁰=0

or -8kN+0.866F56+0.866F45=0&&&&&&&&&&&&&&&&. (8)

Fy=0. Analysis of forces acting along the x-axis

-F5-F45cos60⁰+F56cos60⁰+F57=0

Or 8kN-0.5F45+0.5F56+F57=0&&&&&&&&&&&&&.&&. (9)

Node 6

Fy=0. Analysis of forces acting along the y-axis

-F6-F56sin60⁰-F67sin60⁰=0

Or -8kN-0.866F56-0.866F67=0&&&&&&&&&&&&.&&&.. (10)

Fy=0. Analysis of forces acting along the x-axis:

-F46-F56cos60⁰+F67cos60⁰=0

Or F46-0.5F56+0.5F67=0&&&&&&&&&&&&&..&.&.&.. (11)

Node 7

Fy=0. Analysis of forces acting along the y-axis

R7+F67sin60⁰=0

Or 8kN+ 0.866F67=0&&&&&&&&&&&&&&&&&&&& (12)

Fy=0. Analysis of forces acting along the x-axis

-F57-F67cos60⁰=0

Or F57-0.5F67=0&&&&&&&&&&&&&&&&&&..&& (13)

The solution of this system will give the values of the tension-compression forces on the truss elements because the 6Kn and 8KN loads (Potter and Nash, 2019). The forces are as shown below:

Compression Force

6kN+0.8666F12=0

F12=-6kN/0.8666= -6.923 kN (Compression)

Tension Force

F13+0.5F12= 0

F13+0.5(-6.923) = 0

F13 = 3.3615 kN (Tension)

Shear Force

-6kN-0.866F12-0.866F23=0

-6kN- 0.866(-6.923) 0.866F23=0

F23 = 0 kN. (Shear Force)

Conclusion

From the above calculations, the results of the reaction forces and nodal displacements discovered using ANSYS and through manual solution were slightly different. Therefore, issues requiring the finite element method may be successfully handled using the ANSYS application. Different design engineers utilize different ways to assess trusses. Using the FEM, one can often only anticipate an approximation of a solution. This is because the precise solution for the truss deformation is a first-degree polynomial. This form of load might be introduced in the future development of this program. Additionally, it would be advantageous to broaden analysis so that not only planar but also spatial issues may be solved.

Reference List

Chen, X. and Liu, Y. (2018) Finite element modeling and simulation with ANSYS Workbench. Florida, FL: CRC press.

Emri, I. and Voloshin, A. (2018) Statics: Learning from engineering examples. New York, NY: Springer

Lindström, S. (2019) Lectures on engineering mechanics: statics and dynamics. New York, NY: Amazon.

Loney, S.L. (2019) The elements of statistics & dynamics part-i statics. New Delhi: Arihant Publications.

Mahdavi, M. (2020) Evaluation and comparison of seismic performance of structural trusses under cyclic loading with Finite Element Method, International Journal of Civil and Environmental Engineering, 14(10), pp. 341-348.

Potter, M. C. and Nash. W. (2019) Schaums outline of strength of materials. 7th edn. New York, NY: McGraw-Hill.

Praisach, Z.I. and Pîran, D.A. (2022) The influence of the truss bar on the dynamic behavior of a Warren truss by changing the modulus of elasticity, Vibroengineering PROCEDIA, 46(1), pp. 41-47.

Reddy, P.S.K. and Nagaraju, C. (2019) Structural optimization of different truss members using finite element analysis for minimum weight, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 9(4), pp. 99-110.

Samadi, S. et al. (2022) Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining, Finite Elements in Analysis and Design, 206(1), p.103762.

Shih, R. (2018) Introduction to Finite Element Analysis using solidworks. Oregon: SDC Publications.

Singh, A., Ahmad, F. and Saini, N.K. (2019) Finite Element Analysis based vibration behavior on Warren Truss Bridge, International Journal of Applied Engineering Research, 14(9), pp. 215-219.

Need help with assignments?

Our qualified writers can create original, plagiarism-free papers in any format you choose (APA, MLA, Harvard, Chicago, etc.)

Order from us for quality, customized work in due time of your choice.

Click Here To Order Now